Table of Contents
Advertisement
Answering system operation
The built-in answering system must be turned on to answer and
record messages.
Call intercept:
If you want to talk to the person whose message is being recorded, press
or
on the handset.
Remote access
You can access the answering system remotely from any touch-tone
telephone. The preset remote access code is 19.
Dial your telephone number from any touch-tone telephone.
1.
When the answering system answers, enter the two-digit remote
2.
access code.
Press 5 to hear a list of remote commands.
3.
Enter the desired remote command code.
4.
Hang up or press 8 to end the call.
5.
Go to pages 3-4 to learn some common settings for your
i
answering system.
•
Delete the playing message.
•
Press twice in idle to delete
all message
•
Increase the speaker volume.
•
Skip to the next message.
•
Start message playback.
•
Stop message playback.
•
Decrease the speaker volume.
•
Repeat the playing message.
•
Press twice to listen to the
previous message
•
Turn the answering system
Turn the answering system
on or off.
8
Advertisement
Table of Contents
