Placement Tips - Cisco ISA550 Quick Start Manual

Back Panel Descriptions
Feature
ANT01/ANT02
USB Port
Configurable
Ports
LAN Ports
WAN Port
RESET Button
Power Switch
Power Connector
Mounting the Cisco ISA500 Series
3
Integrated Security Appliances
You can place your security appliance on a desktop, mount it on a wall, or
mount it in a rack.

Placement Tips

• Ambient Temperature: To prevent the security appliance from
overheating, do not operate it in an area that exceeds an ambient
temperature of 104°F (40°C).
• Air Flow: Be sure that there is adequate air flow around the security
appliance.
6 Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
Description
Threaded connectors for the antennas (for ISA550W and
ISA570W only).
Connects the unit to a USB device. You can use a USB
device to save and restore system configuration, or to
upgrade the firmware.
Can be set to operate as WAN, LAN, or DMZ ports. The
ISA550 and ISA550W have 4 configurable ports. The
ISA570 and ISA570W have 5 configurable ports.
N Only one configurable port can be configured as a
OTE
WAN port at a time. Up to 4 configurable ports can be
configured as DMZ ports.
Connects PCs and other network appliances to the unit.The
ISA550 and ISA550W have 2 dedicated LAN ports. The
ISA570 and ISA570W have 4 dedicated LAN ports.
Connects the unit to a DSL or cable modem, or other WAN
connectivity device.
To reboot the unit, push and release the RESET button for
less than 3 seconds.
To restore the unit to its factory default settings, push and
hold the RESET button for a minimum of 3 seconds while
the unit is powered on. The POWER/SYS light will flash
green when the system is rebooting.
Powers the unit on or off.
Connects the unit to power using the supplied power cord
and adapter.