0348E3.fm Page 8 Tuesday, April 25, 2000 4:15 PM
P
P
(PIP) O
ICTUR E IN
ICTUR E
PERATION
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the
same time with or without an external video source (VCR).
Without a VCR
Procedure
•
Connect incoming cable to antenna (ANT) input on back of TV.
•
Press the PIP button on the remote control to display the PIP frame.
•
Choose channels for the PIP frame by pressing the remote control PIP CH
•
Choose channels for the Main Picture by pressing the remote control CH
keypad.
Note:
The audio is from the Main Picture only.
With a VCR and Cable Box
Connect your television to a VCR and cable box, as shown.
ANT
The Remote Control must be programmed with supplied codes to operate the VCR and cable box. (See
Note:
"Programming the Remote" on page 16.)
Procedure
Press the PIP button on the remote control to display the PIP frame.
To view scrambled channels through your cable box in the PIP frame:
•
Press the INPUT button on the remote control to select the video input to which your VCR is connected.
•
Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3 or 4.
•
Choose channels for the PIP frame by pressing the CABLE button on the remote control and using the
numeric keypad or CH
•
Choose channels for the Main Picture by pressing the TV button on the remote control and using the numeric
keypad or CH
The audio is from the Main Picture only.
Note:
Picture in Picture (PIP) Operation
TERMINALS ON BACK OF TV
R AUDIO
L
COMPONENT
TO AUDIO
VIDEO INPUT
AMP
P
P
Y/VIDEO
R
B
INPUT 1
L
S-VIDEO
R
R AUDIO
L
VIDEO
INPUT 2
CABLES NOT SUPPLIED
buttons.
buttons.
SWAP and RECALL Buttons
The SWAP button switches the PIP and the
main picture source. The RECALL button
shows the status of the onscreen PIP and
the main picture.
- 8 -
buttons.
buttons or by using the numeric
VCR
CABLE BOX
S-VIDEO OUT
ANT OUTPUT
ANT INPUT
VIDEO OUT
L
ANT INPUT
OUTPUT
AUDIO OUT
R
Cable splitter
Cable splitter not supplied
(Not supplied)
Incoming cable