0348E3.fm Page 9 Tuesday, April 25, 2000 4:15 PM
With a VCR - No Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two (2) live broadcasts at the
same time without or with an external video source (VCR).
Connect your television to a VCR, as shown.
ANT
Note:
The Remote Control must be programmed with the supplied codes to operate the VCR. (See
"Programming the Remote" on page 16).
Procedure
Press the PIP button on the remote control to display the PIP frame.
Note:
The audio is from the Main Picture only.
To view an external video source in the PIP
•
Press the INPUT button on the remote control to select the video input to which your VCR is connected.
•
Verify the VCR is on.
•
View the external video source in the PIP frame.
•
Choose channels for the Main Picture by pressing the TV button on the remote control and using the numeric
keypad or CH pq button.
Picture in Picture (PIP) Operation
TERMINALS ON BACK OF TV
R AUDIO
L
COMPONENT
TO AUDIO
VIDEO INPUT
AMP
P
P
Y/VIDEO
R
B
INPUT 1
L
S-VIDEO
R
R AUDIO
VIDEO
L
INPUT 2
CABLES NOT SUPPLIED
frame:.
SWAP and RECALL Buttons
The SWAP button switches the PIP and
the main picture source. The RECALL
button shows the status of the onscreen
PIP and the main picture.
VCR
S-VIDEO OUT
ANT INPUT
VIDEO OUT
L
AUDIO OUT
R
- 9 -
Incoming cable