Frequency/Voltage Control - Gigabyte GA-945GZM-S2 User Manual

2-7

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
CPU Clock Ratio
(Note)
O.C FSB1066 Core 2 CPU
CPU Host Clock Control
x CPU Host Frequency(Mhz)
x PCI Express Frequency
System Memory Multiplier
Memory Frequency (Mhz)
: Move Enter: Select
F5: Previous Values
Incorrectly using these features may result in system instability or corruption.
Doing a overclock or overvoltage on CPU, chipsets and memory modules may result in
damages or shortened life expectancy to these components.
Please be aware that the menu items are for power users only.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
O.C FSB1066 Core 2 CPU
Enable use of Core
TM
you must install DDRII 533 memory module(s), a Core
card.
Disabled Disable the use of Core
Enabled Enable the use of Core
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled Disable CPU Host Clock Control. (Default value)
Enabled Enable CPU Host Clock Control.
CPU Host Frequency (Mhz)
100 ~ 600 Set CPU Host Frequency from 100 MHz to 600 MHz.
If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.
If you use a 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.
Incorrect using it may cause your system broken. For power End-User use only!
(Note) This item will show up when you install a processor which supports this function.
Frequency/Voltage Control
[18X]
[Disabled]
[Disabled]
200
Auto
[Auto]
533
+/-/PU/PD: Value
F6: Fail-Safe Defaults
2 CPUs with 1066 MHz FSB through overclocking. To enable this feature,
2 CPU (1066 MHz FSB). (Default value)
TM
2 CPU (1066 MHz FSB).
TM
- 45 -
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
2 CPU and a PCI Express x16 graphics
TM
Item Help
F1: General Help
BIOS Setup