Table of Contents
Advertisement
Before Using Your Compact kitchen
•
Remove the exterior and interior packing.
•
Check to be sure you have all of the following parts:
Kitchen Section
•
1 Wire Shelf
•
Strainer
•
Strainer Plug
•
Backsplash and Assembly Screws
•
Instruction Manual
•
Before connecting the refrigerator of your Compact Kitchen to the power source, let it stand
upright for approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system of the refrigerator from handling during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
Energy Saving Tips
•
The Compact kitchen should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
Installation of Your Compact Kitchen
NOTE:
1. In order to remove shelves of refrigerator, a clearance A of 10 inches is
required. When built-in, no clearance is required on either side.
2. B = 30 inches minimum clearance between the top of the cooking surface
and the bottom of an unprotected wood or metal cabinet.
INSTALLATION INSTRUCTIONS
Figure No. 1
7
Refrigerator Section
•
2 wire shelves
•
Instruction Manual
Hide quick links:
Advertisement
Table of Contents
