Water Faucet Installation And Water Line Connection; Sink Strainer And Water Drain - Avanti CK3016 Instruction Manual

 Water Faucet Installation And Water Line Connection
Connection to the water supply must be performed by a professional licensed plumber and comply
with all Local Codes and Ordinances.
IMPROPER WATER LINE CONNECTION MAY RESULT IN FLOODING
REVIEW STATE AND LOCAL PLUMBING CODES BEFORE INSTALLATION
•
Turn off the water supply.
•
Install the water faucet as above picture.
•
Connect the water supply hoses to the water faucet by matching cold to cold and hot to hot. Do
not stretch the water supply hose. If the hose is too short, replace the hose with a longer, high-
pressure hose.
 Sink Strainer Installation And Water Drain
Connection to the water sink must be performed by a professional licensed plumber and comply with
all Local Codes and Ordinances.
•
The sink strainer is already preassembled in the factory.
•
Secure the water drain system to the sink strainer as below shown.

WARNING
YOU MUST USE A LICENSED PLUMBER
Figure No. 4
Figure No. 5
10
