Using The Console Port - D-Link AirPremier N DAP-2690 User Manual

Section  - Configuration
You can connect to the DAP-2690 console port to configure device
settings via the command line.
1. Connect one end of the provided serial console cable to the console
port on the DAP-2690, and the other to an available serial port on
the PC you wll use to connect to the device.
2. Run HyperTerminal on the PC:
• �o to the Start Menu
• Select All Programs
• Select Accessories
• Select Communications
• Select HyperTerminal
3. Enter a New Connection name:
D-Link DAP-690 User Manual

Using the Console Port