Specifications
BATTERY CONDITION
Symptom
The (
) indication in the electronic
viewfinder flashes to indicate battery is
discharged.
The battery level indicator (
differently on the LCD monitor and in
the viewfinder.
NO OPERATION IS ACCEPTED
Symptom
Power is turned on, but no button
operations are accepted.
TAPE DISPLAY
Symptom
"TAPE" appears in the viewfinder or
LCD monitor.
Specifications
General Specifications
Power requirements
Power consumption
Dimensions
Weight
cassette
Operating temperature
start recording.
• Do not remove the clock battery after recording.
• Do not eject the recorded cassette. Leave it in the
camcorder.
Check Point & Correction
• Try another battery or charge the battery.
) appears
• This does not indicate a fault; it is because the
power consumed by the LCD monitor and viewfinder
is different.
Check Point & Correction
• Remove the power source and the date/title
battery. And after about one minute, the display in
the viewfinder or LCD monitor will be reset. Then set
the information again.
Check Point & Correction
• Have you moved the camcorder or cassette from a
cold place to a warm place so that its temperature
changed abruptly? If the temperature has changed,
remove the cassette and set the CAM/OFF/VIDEO
switch to OFF, then wait for about one hour.
• Remove the cassette and then try to reinsert:
remove it several times. If the indication is still
shown in the viewfinder, use a cleaning tape to
clean the heads and replace the cassette.
7.2V DC
4.4W (when recording/LCD monitor OFF)
5.5W (when recording/LCD monitor ON)
4-1/8" W x 4-1/2" H x 9-7/16" D (104mm x 115mm x 239mm)
2.03 lbs (approx. 920g) without battery pack or
32°F ~ 104°F (0°C ~ 40°C)
67