Date Search - Hitachi VM-H835LA Instruction Manual

Date Search

appears in the viewfinder or LCD monitor. (Refer to "Date Search" on page 41).
Note: The linear time counter with the memory feature and "SEARCH" in the viewfinder or
LCD monitor can also be displayed on the connected television.
Note: If the LCD monitor is opened or closed (the picture is switched) during playback, the
on-screen display in the picture will disappear for about one second, and then reappear
again.
Note: When the date and time appear on the LCD monitor, you cannot erase them by
pressing the DISPLAY button. If you want to erase the on-screen display, press the
DATE/DISP. button on the camcorder.
Date Search
The date search function memorizes the start and end positions of recordings you made
on a specific day so you can easily locate those positions later as long as the cassette
is left in the camcorder.
Note: Be sure that the date and time are set.
1. Attach a power source and slide the CAM/OFF/VIDEO switch to VIDEO.
2. Press the DATE/DISP. button (the DISPLAY button on the remote control) to display
"SEARCH" in the viewfinder or LCD monitor.
3. Press the REW/REVIEW button to search for the start position from which you last
made a recording or the F.FWD button to recording end position. " SEARCH" will
appear while the start position is being searched for; "SEARCH
position is being searched for.
4. When the required position is located, the camcorder enters the stop mode and
"SEARCH" disappears from the viewfinder or LCD monitor.
Note: If you have ejected the cassette, this function will not operate with that cassette.
(When a cassette is inserted and the recording is started, the position is identified as the
recording start position on that day.)
Note: If the clock battery is not inserted, the date search function does not operate when
the battery providing the power to the camcorder is removed.
Note: When the cassette was recorded by another camcorder, the date search function
does not operate.
Note: The date search function is released when you press the STOP button during date
search mode.
", while the end
50