Hitachi VM-H835LA Instruction Manual page 15

Identifying Controls
monitor.
22. DC IN Jack
When using the AC adapter/charger, connect one end of the DC cord (provided) to this
jack and the other end to the DC OUT jack of the AC adapter/charger. When using the
car battery cord (optional), connect this jack and the DC OUTPUT jack of the car battery
cord.
23. AUDIO/VIDEO Output Jacks (Behind the jack cover)
You can use an audio/video cable (not supplied) instead of the AV stereo output cable
(provided) when viewing the playback picture on the TV, etc.
• Connect the yellow plug of the audio/video cable to the yellow jack (VIDEO OUT) and
the white plug to the white jack (AUDIO OUT).
• The playback sound becomes monaural.
24. Power Supply Attachment Section
Attach the battery here ("Camcorder Batteries", p16).
25. Shoulder Strap Slots
Attach the shoulder strap here.
Right side/Underside Illustration
26. BATTERY EJECT Lever
Releases the battery attached to camcorder.
27. EJECT Switch
Slide this switch to open the cassette door. A power source must be connected before
cassettes can be inserted or removed though the CAM/OFF/VIDEO switch may be set
to OFF ("Inserting and Removing Cassettes," p18)
28. Power Zoom Control
Use this to zoom automatically ("Using the Power Zoom," p 26).
29. PLAY Button
Use to playback recorded tapes.
30. STOP button
Use this button to stop playback, fast forward, or reverse. Also use this button to set
date and time.
31. Audio/Video Input/Output Jack (Behind the jack cover)
Use this jack to connect the camcorder to a VCR or television ("Playing Back Your
Recording on Your TV", p30, 31, "Dubbing from the Camcorder to a VCR", p45
"Recording Television Programs", p53).).
32. REW/REVIEW Button
Use this button to fast forward tapes or for visual search. During visual search the
camcorder rewinds at approximately 7 times normal playback speed ("Using Forward
and Reverse Search", p29). Also use this button to set date and time. Furthermore, use
this button to review the last few seconds of the tape you are recording.
33. F.FWD Button
Use this button to fast forward tapes or for visual search. During visual search the
camcorder fast forwards at approximately 9 times normal playback speed ("Using
Forward and Reverse Search", p29). Also use this button to set date and time.
34. START/STOP Button
When the CAM/OFF/VIDEO switch is in CAM press this button to start recording. When
pressed a second time the camera pauses.
During playback use this button to stop the tape temporarily. Pressing a second time
resumes normal playback.
35. CAM/OFF/VIDEO Power Switch
15