Part Names - Aiphone JOS-1A Installation & Operation Manual

PART NAMES

jo-1mD
Color LCD screen
Displays camera images during door
station call-ins, communication with door
station, and door station monitoring
Microphone
Sends sounds from this station
to other stations.
[Bottom View]
Camera-angle adjustment switch
The camera-angle adjustment switch is behind
the panel. Pushing the button changes the angle
of the camera.
+17° (Upward)
+7° (Upward)
0° (Center)
-7° (Downward)
jo-DV
Illumination
sensor
Call button
Vandal resistant front panel
4
Remove protective film before use.
RESET button
Press this button to reboot this
station when it is not responding.
jo-DA
Camera-angle
adjustment switch
Drainage holes
These are for discharging rain water inside the unit.
Do not obstruct these holes.
Camera
Microphone
White light LED
Speaker
Name plate
(with backlight)
The backlight is always lit while
the power is on.
Drainage holes
Volume control button
[During standby]
Adjust the calling volume.
Volume adjustment range: (mute),
[During communication or monitoring]
Adjust the communication volume.
Volume adjustment range: -
Status LED (orange)
Indicates the current status of this station by lighting up or blinking.
On: During communication sending, while the door release button is
being pressed, or while the option button is being pressed
Flashing: During communication reception in the PTT mode, during
short detection or during mute
Monitor button
Monitor a door station
Option button
To activate/trigger external device
Screen brightness control button
Adjusts LCD screen brightness
Brightness adjustment range:
Door release button
Unlocks door
Talk/off button
Starts or ends communication.
Speaker
Call tones, sounds from a door station.
Camera
Captures images to display on the screens of
the master and expansion monitor station.
Microphone
Sends sounds from the door station to the
master and expansion monitor station.
Illumination sensor
Detects outside illuminance to recognize whether
it is daytime or nighttime.
Speaker
Outputs sounds from the master or expansion monitor station.
Call button with white light LED
Calls the preset master and expansion monitor station.
Lights up automatically when it gets dark around this station.
jo-DVF
Illumination
sensor
Vandal resistant front panel
-
-
Camera
Microphone
White light LED
Speaker
Name plate
(with backlight)
Call button