Installing The Display Assembly - Dell Vostro 3550 Owner's Manual

Installing The Display Assembly

1. Attach the display assembly to the base of the computer.
2. Tighten the screws to secure the display assembly.
3. Connect the touch panel cable (if any) to the system board.
4. Connect the display data cable to the system board.
5. Secure the antenna cables to the routing channels.
6. Connect the antenna cables to the installed wireless solutions.
7. Connect the middle cover.
WLAN card .
8. Install the
palm rest .
9. Install the
keyboard .
10. Install the
WWAN card .
11. Install the
access panel .
12. Install the
battery .
13. Install the
14. Follow the procedures in
74
After Working Inside Your Computer .