Dell Vostro 3550 Owner's Manual page 99

SATA Operation
Adapter Warnings
Function Key Behavior
Charger Behavior
Miscellaneous Devices
Security
Set Service Tag
Set Supervisor Password
Set HDD Password
Password Bypass
Computrace
Boot
Boot Priority Order
Hard Disk Drives
Change the SATA controller
mode to either ATA or
AHCI.
Enables or disables adapter
warnings.
Specifies the behavior of
the function key <Fn> .
Specifies if the computer
battery will be charged
when connected to an AC
power source.
These fields let you enable
or disable various on board
devices.
This field displays your system's service
tag. If the service tag is not already set,
this field can be used to enter it.
Allows you to change or delete the
administrator password.
Allows you to set a password on the
computer's internal hard drive (HDD).
Allows you to bypass the system
password and the internal HDD password
prompts during a system restart/resume
from hibernate state.
Enable or disable the Computrace feature
on your computer.
Specifies the order of different devices in
which the computer will boot through at
start up.
Specify which hard drive the computer
can boot through.
Default: AHCI
Default: Enabled
Default: Function key first
Default: Enabled
99