Using Instant Review; Using Quick Edit; Using Macro - Hitachi VM-E56A Instruction Manual

Advanced Techniques
Note: When fading out be sure to wait until the PAUSE indicator (
put the camera/recorder into the record mode again.

Using Instant Review

Use this feature to view the last few seconds of the tape you shot.
1. Set the camera/recorder to record/pause mode and tap the REW/REVIEW button. The last few
seconds of tape play back in reverse and then in normal playback mode.
2. The camera plays back to the spot where you paused and returns to record/pause mode
(standby). Press the Start/Stop button to resume recording.

Using Quick Edit

Use quick edit to search for the end of previously recorded material, find a particular spot on
your tape, begin editing, or record new material. While the camera is in record/pause mode hold
down the F.FWD, REW/REVIEW, or PLAY button and visually search the tape. Release the
button and the camera/recorder stops the tape at the exact position you selected.

Using Macro

pg. 37
) is visible in the viewfinder
- 44 -
before attempting to
44