Hitachi VM-E56A Instruction Manual page 55

8mm video camcorder
Table of Contents

Advertisement

General Maintenance
Picture bends at the top of the TV screen.
Color of your TV screen is too bright, too faint
or change.
BATTERY CONDITION
SYMPTOM
The (
) indication in the electronic viewfinder
flashes.
NO OPERATION IS ACCEPTED
SYMPTOM
Power is not turned on and no button operations
are accepted.
TAPE DISPLAY
SYMPTOM
TAPE appears in the viewfinder.
- 55 -
TV receiver is older type. It needs to be
modified to work properly with
camera/recorder.
Tape is damaged. Try another cassette.
TV set has VIR circuit. Turn it off during
playback.
CHECK POINT & CORRECTION
Try another battery or charge the batteries.
CHECK POINT & CORRECTION
Remove the power source, and after about one
minute, push the reset switch gently using a
toothpick, etc. until you feel a click. The
display will be reset. Then set the information
again.
CHECK POINT & CORRECTION
Have you moved the camera/recorder from a
cold place to a warm place so that its
temperature changed abruptly? If the
temperature had changed, remove the cassette
and set CAMERA/OFF/VIDEO switch to OFF,
then wait for about one hour.
Remove the cassette and then try to reinsert,
remove it several times. If indication is still
shown in the viewfinder, use a cleaning tape to
clean the heads and replace the cassette.
pg. 51
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm-e58a

Table of Contents