Viewing The Picture Played Back On Your Tv - Hitachi VM-8400LA Instruction Manual

VIEWING THE PICTURE PLAYED BACK ON YOUR TV

VIEWING THE PICTURE PLAYED BACK ON YOUR TV
To play back a tape recorded on your camcorder and view it on your TV receiver, you must
connect the camcorder to the TV receiver using either audio/video cable (not supplied) or RF
converter unit (optional).
You also may play back the tape recorded by your camcorder on any other VHS video
cassette recorder. The camcorder records and plays back in VHS standard speed (SP). A tape
recorded in long play (LP) or extra long play (EP) cannot be played back on this camcorder.
Example 1: If your TV has "VIDEO IN" and "AUDIO IN" jacks,
NOTE: Make sure that the "AV OUT/IN" is in the "OUT" position.
1. Connect the audio/video cable to "AUDIO IN" and "VIDEO IN" of your TV.
2. Connect the other end of the audio/video cable to -AUDIO' and "VIDEO" of your camcorder.
3. Turn on TV.
4. Press "STOP/EJECT" button on the camcorder and then insert the cassette.
5. Place "CAM/OFF/VIDEO" in "VIDEO" position.
6. Press "PLAY".
7. After playing press "STOP/EJECT".
Tracking adjustment
When playing prerecorded tapes or tapes recorded by the recorders other than your own,
black and white streaks may appear on the TV screen. If this occurs, press "TRACKING"
control (W or T) until the streaks disappear.
When the cassette is ejected, the tracking is reset to normal.
Example 2: If you have a VHS VCR,
1. Insert the recorded tape into your VCR.
2. Press "PLAY" of your VCR.
NOTE: When noise appears in the played back picture, adjust "TRACKING" control on the
VCR so there is no noise.
Example 3: If your TV is a regular TV,
click for image of diagram
NOTE: Make sure that the "AV OUT/IN" is in the "OUT" position.
50