Table of Contents
Advertisement
TROUBLESHOOTING
Symptom
The "
" indication in the electronic viewfinder
flashes to indicate battery is discharged.
NO OPERATION IS ACCEPTED
Symptom
Power is not turned on and no button
operations are accepted.
.
PLAYBACK OF PRE-RECORDED CASSETTE
Symptom
"PLAY" cannot be engaged.
No picture appears on television screen when
"PLAY" is pressed.
Interference on playback picture.
Picture bends at the top of the TV screen.
Color of your TV screen is too bright, too faint
or change.
Check Point & Correction
Try another battery or charge the battery.
Check Point & Correction
Remove the power source and after about
one minute, push the reset switch gently using
a toothpick, etc. until you feel a click. Since
this erases the date, time and other customer
preferred features, reset them again.
Check Point & Correction
Set "CAM/OFF/VIDEO" to VIDEO position.
Set the television to the camcorder channel
(3 or 4) depending upon the selected channel
on the RF channel select switch of RF
converter unit.
Set "AV IN/OUT" switch to "OUT" position.
Adjust the tracking using "TRACKING" control
(power zoom switch)>
When you see the playback picture on your
TV, adjust fine tuning knob on television set to
obtain best picture.
The pre-recorded tape is EP or LP recording.
This camcorder is for use in SP recording
only.
TV receiver is of older type it needs to be
modified to work properly with camcorder.
Tape is damaged. Try another cassette.
TV set has VIR circuit. Turn off during
playback.
57
Advertisement
Table of Contents
