Hitachi VM-8400LA Instruction Manual page 28

DATE/TIME SETTING
6. Press "F.FWD" or "REW/REVIEW" as many times as may be required to select correct hour,
and then press "STOP/EJECT".
7. Repeat step 6 to select minute and AM/PM.
8. After setting AM or PM, press "DATE/TIME" to change the display and start the internal
clock. It is recommended that you press "DATE/TIME" to match the time signal.
NOTE: After the date and time are set, AUTO" appears and the camcorder enters the
automatic date recording mode. See "DATE RECORDING" on page 25.
To correct date/time information after starting the date/time
1. Press and hold "DATE/TIME", and then press "STOP/EJECT". The month starts flashing.
2. Correct the incorrect digit by using "F.FWD", "REW/REVIEW" and "STOP/EJECT".
To correct date/time information during programming
Press "STOP/EJECT" repeatedly until the digit that is incorrect flashes. Correct the incorrect
digit by using "F.FWD", "REW/REVIEW" and "STOP/ EJECT".
28