Table of Contents
Advertisement
SELECTING SCENES RECORDED ON HDD AND DUBBING THEM (SCENE
"SELECT" DUBBING)
You can select desired scenes recorded on HDD and dub only those scenes on DVDs.
1
Press the DUBBING button.
The Dubbing Menu will appear.
You can also display the Dubbing Menu from
the Disc Navigation screen: Press the DISC
NAVIGATION button, press the MENU
button, choose "Scene", "Dubbing",
"Execute", and then press the
2
From the Dubbing Menu screen, choose
"Select" and press the
If no DVD is loaded in this DVD video
camera/recorder, a message will appear:
Press the DISC EJECT button, and then load a
DVD.
3
Place the cursor on a scene to be dubbed, and
then press the
or PHOTO/SELECT
button: The cursor of the selected scene will
change to red (see p. 74), and the scene with
red cursor will be dubbed to a DVD.
If you wish to dub other
scenes, place the cursor
on a scene in the same
way, and press the
or PHOTO/SELECT
button to select it.
To cancel a selected
scene, press the
button again. To cancel all selected scenes,
press
(STOP/EXIT).
TURNING OFF DUBBED MARK FROM THUMBNAIL (MARK OFF)
If the dubbed mark
1
Press the DISC NAVIGATION button, and
then press the MENU
2
Choose "Scene",
"Dubbing", "Mark
Off", and then press the
button.
The "Cancel Dubbed
Mark" screen will appear.
3
Place the cursor on a scene for which you
want to turn the dubbed mark off, and then
press the PHOTO/SELECT button.
You can also select multiple scenes.
button.
button.
DVD remaining bar
D u b b i n g ( S e l e c t )
ENTER
SELECT
DUB
or PHOTO/SELECT
makes the thumbnail difficult to see, you can turn off the mark.
S c e n e
E x e c u t e
Ma r k O f f
Dubbing
ENTER
RETURN
If the total capacity size of the selected scenes
exceeds the remaining free space on DVD, the
remaining bar at the top right of screen will
be red, and a message will appear. Select the
scenes again.
If you select a scene whose size exceeds one
DVD, a message that prompts you to divide it
will appear: After dividing the scene, execute
dubbing again.
4
Press the DUBBING button.
The screen for verifying dubbing will appear.
Instead of pressing the DUBBING button, you
can press the MENU button, choose "Edit",
and then "Enter": The same screen will appear.
Choosing "YES" will start dubbing.
To cancel dubbing, choose "NO" or press
(STOP/EXIT).
5
When dubbing is finished, check the "Delete
Scene" screen.
Choosing "YES" will delete the dubbed
scenes from the HDD.
To retain the dubbed scenes on the HDD,
choose "NO".
6
Press the DISC EJECT button to remove the
DVD.
Close the cover of DVD insertion block.
If you do not want to remove the DVD, press
the
(STOP/EXIT) button to end dubbing.
4
If there is no change in the scene for which
you want to turn the mark off, press the
button.
5
Press the
(STOP/EXIT) button to end the
mark-off procedure.
:
Note
• You can use "New" dubbing to dub scenes with the
dubbed mark turned off.
• Pressing the MENU button in step 3 will display the
submenu screen (see "Editing using submenu" on
page 85).
83
Advertisement
Table of Contents
