Hitachi DZ-HS500SW Instruction Manual page 139

Hitachi camcorder instruction manual
Table of Contents

Advertisement

Message
Cannot combine scene. Unless consecutive scenes are selected, they cannot be
Cannot combine scene
of multiple programs.
Create PlayList first,
and then combine
scenes.
Cannot combine.
Deselect PHOTO
scenes.
Cannot combine. Select
multiple scenes.
Cannot delete scenes.
Cannot divide scene.
Cannot execute.
Change display
category to ALL.
Cannot execute.
Unselect multiple
scenes.
Cannot finalize DVD in
HDD mode. Please
finalize DVD in DVD
mode.
Cannot read DVD.
Check dirt/crack/both-
sides contrary/inserted
correctly.
CANNOT RECORD
PHOTOS
CANNOT RECORD
VIDEO
Cannot replace
thumbnail on PHOTO
scenes.
Cannot select any more
scenes.
CANNOT SLEEP
MODE
Cause & Troubleshooting
combined.
Scenes in different programmes (different recording dates)
cannot be combined. Create a Playlist first, and then combine
such scenes on the playlist.
Select only movies and combine them.
Select a range of at least 2 scenes to be combined, and then
combine them.
This may occur when scene that was edited for division, etc. is to
be deleted.
Combine the divided scenes, and then delete them.
This message will appear when the scene is extremely short
because division, etc. was repeated.
This message will appear if you attempt to combine or move
scenes with "Category: VIDEO or PHOTO" specified.
Division or change in thumbnail was executed when multiple
scenes were selected.
This message will appear if you press the FINALIZE button when
the power switch is set to "HDD". Set the power switch to "DVD",
and then finalise the disc.
Error occurred while the disc was being recognised. Make sure
that there is no scratch or dirt on disc, that the surface/back of
disc is not reversed, and that the disc is firmly pushed against the
turntable. See *3 and *4 on page 144.
• This message will appear when the PHOTO/SELECT button is
pressed with the power switch set to "HDD" or "DVD".
• No photo can be recorded on the HDD or disc in this DVD
video camera/recorder: Use a card to record photos.
This message will appear when the REC button is pressed with
the power switch set to "SD".
The thumbnail of a still cannot be changed.
Select a movie.
The maximum number of selectable scenes is 999.
The DVD video camera/recorder can enter the sleep/restart
status only from the recording pause status. The following
conditions apply:
• No DVD is loaded in this DVD video camera/recorder but the
power switch is set to "DVD".
• No card is loaded in this DVD video camera/recorder but the
power switch is set to "SD".
• The HDD, disc or card has no remaining space.
• The HDD/disc is protected.
Reference
page
86
86, 97
86
86
84, 86
85
109
74
30, 107
10, 37
30, 156
30
89
92
42
139

Advertisement

Table of Contents
loading

Table of Contents