Switching Quality Of Still Image (Quality); Receiving Image From Another Device (Input Source) - Hitachi DZ-HS500SW Instruction Manual

SWITCHING QUALITY OF STILL IMAGE (QUALITY)

You can switch the still recording quality.
It is recommended that you use "FINE" when recording vital images (p. 156 "Size And Quality
Of Photos").
1
Press the MENU button, use the
/ / buttons to choose "Quality" on
the "Record Functions Setup" menu screen,
and then press the
2
Choose the option you want, and then press
the button.

RECEIVING IMAGE FROM ANOTHER DEVICE (INPUT SOURCE)

If you wish to input an image from another device to this DVD video camera/recorder, you must
first switch the setting on the DVD video camera/recorder.
Refer to the explanation starting from page 115 on how to connect the DVD video camera/recorder
to other devices or record images input from them.
Setting
CAMERA
Usually select this option
LINE
To input image from another device
1
Press the MENU button, use the
/ / buttons to choose "Input
Source" on the "Record Functions Setup"
menu screen, and then press the
2
Choose "LINE", and then press the
button.
/ /
button.
HDD HDD
Content
/ /
button.
3
Press the MENU button to end the setting.
:
Note
• The still quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
No display
L IN
3
Press the MENU button to end the setting.
:
Note
The "Input Source" setting will return to "CAMERA"
whenever the DVD video camera/recorder is turned off.
On-screen display
63