Hitachi DZ-B35A Instruction Manual page 136

Message
Disc error has occurred.
Keep disc inside &
restart.
Disc error has occurred.
Unfinalizing is not
complete.
Disc error has occurred. • Use another disc.
Disc full. Cannot
execute.
Disc has no data.
Disc has no PlayList.
Disc includes protected
scenes. Delete scenes?
Disc is full. Cannot add
control info.
Disc is not formatted.
Format the disc now?
Disc must be finalized
before it can be played
back on DVD player or
DVD recorder.
Drive overheat. Please
retry later.
DVD-R* Disc, 16:9
mode cannot be
changed, when Video
mode is STD.
DVD-R* Disc, Input
Source cannot be
changed.
136
Cause & Troubleshooting
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc being used
in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
This message will appear when disc error occurred during
unfinalization, and unfinalizing disc failed. Replace the disc.
• See *3 and *4 on page 139.
• Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/
recorder.
Initialize the disc or use another disc.
• Initializing the disc will erase all data on it.
Delete unnecessary scenes before using this disc, or use another
disc.
This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
Switching of play list was selected with no play list stored.
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device
that has executed software-protect.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
• Has the disc been initialized on a PC?
Choose "YES" and initialize the disc when using it on this DVD
video camera/recorder. Initialization will delete all data on the
disc.
• See *2 on page 139.
• This message will appear if you remove a DVD-RW (VF-mode)/
DVD-R that has not been finalized from the DVD video camera/
recorder.
• See *5 on page 139.
The temperature inside the DVD video camera/recorder is too
high, and reading or writing of the data on disc may not be
performed normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video
camera/recorder is placed in a well-ventilated spot.
With DVD-RW (VF-mode)/DVD-R/+RW disc, the setting of 16:9
mode will not be possible when the Video mode is STD.
* "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode),
"+RW" will appear when using a +RW.
Once a DVD-RW (VF-mode)/DVD-R disc has been recorded in
the 16:9 mode, the input source will not be changeable.
* "DVD-RW (VF)" will appear when using a DVD-RW (VF-mode).
Reference
page
26
103
10, 24
99
79
—
93
—
79, 81
99
108
31
63
63