Kolcraft Contours Options Instruction Sheet page 7

★
2 & 3
To Assemble Adjustable Footrest Mechansism to Seat
1
2
Spring Loaded Button
To Assemble Front Wheels
▲
▲
★
Spring
Loaded
Buttons
Push Together
Lay stroller back on handle.
1
Position front wheel assembly as shown.
2
NOTE: There is a LEFT and RIGHT front
wheel assembly. Be sure to assemble
them onto the correct leg tube.
• TRIANGLE = "▲" RIGHT
• STAR = "★" LEFT
Push front wheel assembly onto front leg
3
tube until spring loaded button clicks
into place.
NOTE: Make sure that spring loaded
buttons pop through frame. If your
spring loaded button becomes out of
place, take pliers and feed button into
hole. If spring loaded buttons DO NOT
pop through, front wheel assembly could
fall off during use.
Repeat for other side.
4
Align both sides of adjustable footrest
1
mechanism with seat tube frame as
shown.
Push adjustable footrest mechanism
2
onto seat tube until spring loaded
button clicks into place.
NOTE: Make sure that spring loaded
buttons pop through frame. If your
spring loaded button becomes out of
place, take pliers and feed button into
hole.
7