For Parts Call 606-678-9623 or 606-561-4983
9. Pull release pins and push hanger locks down.
Lock in place on both sides.
10. Attach front quick-disconnect universal to PTO
shaft on the tractor. Apply a small amount of
grease to the square shaft on the universal
shaft.
8-7.3
Belt Removal and Replacement.
8-26
www.mymowerparts.com
NOTE
When replacing the belt, use only an O.E.M.
belt. Order part number 754-0197 from your
nearest authorized service dealer.
1. Remove mowing deck cover.
2. Disconnect spring from idler to obtain slack on
the belt. Remove belt.
3. Install new belt. See Figure 8-41.