MTD Garden Tractors User Manual page 211

For Parts Call 606-678-9623 or 606-561-4983
b. Pull brake cable toward the front of the
tractor and line it up with a hole in the
brake bracket. Attach cable to the next
hole toward the rear of the tractor using
clevis pin, flat washer 1/4 inch ID and hair-
pin clip. There should be some slack in the
cable as shown. See Figure 8-5.
c. Place blade engagement lever in the
engaged position. Place lift lever in the
highest position (all the way back). The
brake cable should now be straight and the
brake pad should be pulled away from the
deck pulley groove.
14. Readjust the deck wheels to the position
desired.
www.mymowerparts.com
8-5
8