Servicing The 618-0229 Mtd 2 Speed Transaxle - MTD Garden Tractors User Manual

For Parts Call 606-678-9623 or 606-561-4983
2. This transaxle, model number 717-1287, has a
new feature: the brake disc and brake shoes
are enclosed inside of the transaxle for added
protection from outside elements such as
sand, dirt and rust that create wear on brake
assemblies that are exposed on the outside.
This inside brake assembly will provide longer
life expectancy.

SERVICING THE 618-0229 MTD 2 SPEED TRANSAXLE

Figure 5-66.
5. Turn the transmission over to allow access to
the perimeter bolts. There are two sizes of
perimeter bolts. Most will be 3/4 inch long. One
is in the center of the transmission. See Figure
5-67.
5-20
www.mymowerparts.com
3. The input shaft has needle bearings and also
incorporates a thrust washer bearing assembly
for higher speeds with minimal wear. See Fig-
ure 5-52 and 5-65. The housing is heavy alu-
minum die cast.
This section will demonstrate the disassembly,
inspection, and reassembly of the MTD 2
speed transaxle, part number 618-0229.
1. Place the shift lever in the neutral position and
remove the three screws attaching the shift
lever cover.
2. Remove the shift lever cover.
3. Pull the shift lever straight up to remove it from
the transmission.
4. Remove the shifter insert and inspect for wear
or damage.
Figure 5-67.
6. Six bolts, three on each side of the housing,
are 2 and 5/8 inches long. See Figure 5-68.