Kenmore 625.388180 Owner's Manual page 18

SECTION4 KNOW ABOUT YOUR WATER SOFTENER
A. DIMENSIONS / SPECIFICATIONS
S
C
T
N
A
B
C
D
E
F1
F2
A
E
D
C
CM
Salt Tank Height 40-1/4 102.2
Resin Tank Diameter 8 20.3
(nominal)
Resin Tank Height 40 101.6
(nominal)
Inlet-Outlet Height 41-1/2 105.4
Overall Height 46 116.8
Length 19-1/2 49.5
Width 16-1/2 41.9
Distance between inlet- 3-3/8 8.6
outlet center lines
BYPASS VALVES
Bypass valve(s) should always remain in soft
water service position• Position in "bypass" only
if needed for softener repairs.
S,.0LEBYP
PULL STEM
• OUTWARD
FOR
SERVICE
Inw3rd
For
/ Bypass
3 - VALVE BYPASS
Bypass
FOR SERVICE Valve
close bypass valve
open inlet & outlet valves Outlet
Valve nlet
FOR BYPASS Valve
open bypass valve
close inlet & outlet valves
ULTRASOFT 175 TIMER SR CODE SR25
ULTRASOFT 180 TIMER SR CODE SR26
Note: Please see the rating decal for operating capacity, salt usage and service flow rate/pressure loss
performance specifications. Performance specifications are validated by the Water Quality Association
(WQA). The rating decal is located on the rim, under the salt hole cover (see page A, inside front cover).
WATER SUPPLY TO WATER SOFTENER
Minimum water system flow (gpm)
Minimum-Max. water pressure (psi).
Minimum-Max. water temperature (° F)
Maximum water hardness (gpg)
Maximum "clear water" iron (ppm)
SALT FOR WATER SOFTENER
Type of salt needed
Alternate type of salt
UltraSo_ 175
3
20- 125
40- 120
95
8
UltraSoff 180
3
20- 125
40- 120
95
8
nugget or pellet
pure, evaporated, compacted
water softener salt
4-1
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line