3. Web Server Quick Guide
3
Illustration 3.6: Step 5 of 7: Country Setting
Note:
If the initial and confirmation settings are different,
If initial and confirmation settings match, but are incorrect, contact service.
To change the country setting later, refer to
Step 6 of 7: Replication
To replicate the settings from steps 1 to 6 to other inverters in the same network
•
•
Note:
When the PV configuration, installed PV power and PV array area of follower inverters in the
network differ from that of the master, do not replicate. Set up the follower inverters individ-
ually.
16
•
country selection is cancelled
•
the wizard recommences step 5
Select inverters
Click [Replicate]
Setup, Setup Details.
8000038784_00_BAL_en / L00410565-01_02