Setting Cooling Temperatures - Electrolux FREEZER Use And Care Manual

Wave-Touch
TM
(some models)
Your refrigerator is equipped with a Wave-Touch
Panel user interface display. It is only necessary
to touch the panel. There is no need to press with
force. There are three levels of display.
1 Level: Sleep Mode
st
Sleep mode displays only the WATER, CUBES
and CRUSHED options. Touch an icon to activate
the desired dispenser mode. The active dispenser
mode is more brightly illuminated.
2 Level: Awakened Display Mode
nd
The display is awakened by touching anywhere on
the panel where there is an indicator. Black space
will not awaken the display. After 10 seconds of
inactivity, the display will return to the Sleep mode.
The following dispenser options are illuminated:
fast ice Increases the production of ice
fast freeze Activates a faster rate for freezing food
dispenser light On / Off
control lock Press and hold for three seconds to activate
and deactivate. This restricts undesired
changes to the refrigerators settings and
prevents use of the ice and water dispenser.
3 Level: User Variable Options
rd
TM
Touching the options icon displays the following
options:
vacation mode Conserves energy by increasing the time
between automatic defrost. This feature is
automatically activated during long periods
between door openings. Vacation mode is
manually activated when the red indicator is
lit.
water filter Touch to display filter condition status.
Press and hold for three seconds to reset.
air filter Touch to display filter status. Press and
hold for three seconds to reset.
temp display When active, it allows the display of the
freezer and refrigerator temps during "Sleep
Mode". The temperature is displayed when
the red indicator is lit.
temp mode Touch to toggle display from Fahrenheit to
Celsius.
mute sounds Tones emitted by each keypress can be
turned off based on user preference. The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
factory default Resets all refrigerator settings such as
temp, temp display, and alarm tones to
their factory default settings.
on off Press and hold for three seconds to turn off
the cooling system to clean the refrigerator.
It also turns off all dispenser functions. The
temperature display will read OFF.
IMPORTANT
Pressing the system off icon does not turn off
power to your refrigerator. You must unplug the
power cord from the wall outlet.

Setting cooling temperatures

1 Touch the panel to illuminate the 2
display.
2 Select the options icon. Plus (+) and minus
Controls
level of
nd
15