Table of Contents
Advertisement
Operating the built-in answering device
Activating the answering device
F 1
1
Turn the
(Auto answer) light on by pressing
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
To record your own greeting message, see page 16.
Listening to recorded messages
When new messages are recorded, the
answer) light will flash.
Press
to listen to recorded messages.
Listening to all of the recorded
messages
Press
(Replay).
Erasing a specific message
1
Press
(Erase) while listening to the message
F 1
you want to erase.
2
Press
.
F 1
Erasing all of the recorded messages
1
Press
(Record).
F 3
2
Press
(Start), then press
Erasing your own greeting message
1
Press
(Record) and rotate the
F 3
dial) until the following is displayed.
2
Press
(Start), then press
The pre-recorded Japanese greeting message will
be played when you receive a call.
light on/flash
F 3
(Auto
.
F 1
(Search
.
F 1
Operating the answering device
from a remote location
.
Preparation: Programming the remote operation ID
1. Press
(Function).
2. Press
3. Enter any 4-digit number (remote operation ID) except
or #.
4. Press
(Register).
F 3
5. Press
(Stop).
Operation: Listening to a recorded message from a
remote location
Turn the
(Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press
or wait 4 seconds.
2
Only the new recorded messages will be played
back.
To listen to all the recorded messages, press
after the new messages have been played back.
F 3
light on
.
4
17
Advertisement
Table of Contents
