Table of Contents
Advertisement
Automatic dialing on the portable handset
Storing names and telephone
numbers in the search dial
1
Press
(Register).
"XXX" shows the remaining
station numbers you can store.
You can program up to 150
stations, including 5 pre-
programmed stations.
2
Enter the name, up to 12 characters (see the table on
page 9 for instructions).
3
Press
(Register) 2 times.
4
Enter the telephone number, up to 30 digits.
To correct a mistake, press
5
Press
(Register).
To store a second or third number, repeat steps
4-5.
6
Press
(Register).
7
If necessary, enter the group number (1-9).
8
Press
(Register).
To program other items, repeat steps 2-8.
9
Press
(Off) to exit the program.
(Clear).
Making a voice call using the
search dial
1
Rotate the
(Search dial) until the desired name
is displayed.
2
Press
(Talk) or press
Editing a stored name or number
1
Rotate the
(Search dial) until the desired name
is displayed.
2
Press
(Edit).
3
Press
.
If you do not need to edit the name, press
(Register) 2 times and skip to step 6.
4
Edit the name (see the table on page 9 for
instructions).
5
Press
(Register) 2 times.
If you do not need to edit the telephone number,
skip to step 8.
6
Enter the correct telephone number.
7
Press
(Register).
To edit a second or third number, repeat steps 6-7.
8
Press
(Register) repeatedly until the following
is displayed.
If you do not need to change the
group number, skip to step 10.
9
If necessary, enter the correct group number.
10
Press
(Register).
(Speakerphone).
11
Advertisement
Table of Contents
