Table of Contents
Advertisement
Automatic dialing on the main unit
Storing names and telephone
numbers in the search dial
F 1
1
Press
(Phonebook).
"XXX" shows the remaining
station numbers you can
store.
You can program up to 150
stations, including 5 pre-
programmed stations.
2
Enter the name, up to 12 characters (see the table on
page 9 for instructions).
3
Press
(Register) 2 times.
F 3
4
Enter the telephone number, up to 30 digits.
To correct a mistake, press
5
Press
(Register).
F 3
To store a second or third number, repeat steps
4-5.
6
Press
(Register).
F 3
7
If necessary, enter the group number (1-9).
8
Press
(Register).
F 3
To program other items, repeat steps 2-8.
9
Press
(Stop) to exit the program.
10
F 3
(Clear).
F 1
Making a voice call using the
search dial
Handset
1
Rotate the
(Search dial) until the desired name
is displayed.
2
Lift the handset or press
Editing a stored name or number
1
Rotate the
(Search dial) until the desired name
is displayed.
2
Press
(Edit).
F 3
If you do not need to edit the name, press
(Register) 2 times and skip to step 5.
3
Edit the name (see the table on page 9 for
instructions).
4
Press
(Register) 2 times.
F 3
If you do not need to edit the telephone number,
skip to step 7.
5
Enter the correct telephone number.
6
Press
(Register).
F 3
To edit a second or third number, repeat steps 5-6.
7
Press
(Register) repeatedly until the following is
F 3
displayed.
If you do not need to
change the group number,
skip to step 9.
8
If necessary, enter the correct group number.
9
Press
(Register).
F 3
F 3
(Speakerphone).
F 3
Advertisement
Table of Contents
