Phone Code; Call Barring - Sagem MYC5-2V User Manual

252210940_myC5-2v_en.book Page 55 Vendredi, 23. septembre 2005 2:36 14

Phone code

The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is
switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is
activated, for example to protect the phone if stolen.
To activate or deactivate the phone code, select the Phone code menu and validate.
Enter 0000 (the factory code, by default) and validate.
Select Activate or Deactivate and validate.
To modify the phone code, select Modify and validate.
Enter old phone code and validate.
Enter new phone code and validate.
Enter phone code again to confirm it and validate.
Confidentiality
The Confidentiality function is used to delete numbers stored in View last calls and the SMS stored in the memory when a
new SIM card is inserted into the phone.
This menu allows the activation of automatic deletion, after power off/on, for messages and/or calls stored in the phone.
On the Security menu, please select the Confidentiality menu and [Select].
Choose Organizer, Calls or Messages.
Select Activate or Deactivate and validate.
Operator
This menu allows you to modify the call barring.
On the Security menu, please select the Operator menu and [Select].
Access to this service depends on your type of subscription.

Call barring

Call barring can be applied to ALL calls (incoming and outgoing), to all incoming calls when you are away from your home
country (if roaming available).
This menu allows you to block the sending or reception of certain calls.
Before you can use this service, a password will be provided by your operator when you take out your subscription.
On the Security menu, please select the Call barring menu and [Select].
Select Activate or Deactivate and validate.
Access to this service depends on your subscription type.
55
Settings