Re-Initialising The Base; De-Registering A Handset - Sagem D70V User Manual

Livre du MD+.book Page 73 Mercredi, 31. mars 2004 1:57 13
S
ETTINGS

Re-initialising the base

When you re-initialise your base, all the base parameters are reset to their
initial values (factory settings), your SMS are not deleted.
On the navigator key
displayed, press OK to confirm.
Select Adv. Settings. Press Confirm
Select Base Settings. Press Confirm
Select Reset Base using
Base Settings
Registr. Mode
Reset Base
OK
Delete Handset
Return Confirm
A confirmation screen will prompt you to confirm your request:
Base 1
• To re-initialise the base, press Yes
Do you want to
reset the base ?
• If you do not wish to re-initialise the base, press No
No Yes
Enter the base code using the keypad. Press Confirm
Base code
Base code :
<Enter code>
To exit the menu, press the red key
Return

De-registering a handset

This function enables you to de-register a handset from your base. This
may be necessary if you have lost a handset or if you already have 6
handsets registered to the same base.
On the navigator key
displayed, press OK to confirm.
Select Adv. Settings. Press Confirm
Select Base Settings. Press Confirm
, press
or . Press Confirm
When re-initialising the base, the base code becomes 0000
again.
, press
73
or until the Settings screen is
.
.
.
.
.
R
.
.
or until the Settings screen is
.
.