Setting Time And Date; Searching For A Network - Sagem MY101X User Manual

Setting Time and Date

The first time the phone is used, the time and date will need to be set.
If the battery has completely run down or been taken out, you will be
asked to validate the time and date.
Setting the time
Set the time either by typing it in or by using the scrolling arrows to
alter the numbers already displayed.
Setting the date
Set the date either by typing it in numerically or by using the scrolling
arrows to alter the display.
When the time and date are correct, validate with the OK key.

Searching for a network

Network indicator
The indicator of the level of network signal received
enables you to visualise the quality of reception. If it shows
less than three bars, look for better reception to make your
call in good conditions.
The phone then searches for a network on which it can
communicate:
If it finds one, the name of the network appears on the screen.
You are ready to make or receive a call.
- If the R letter and a network name are displayed, calls can be
made.
- If the R letter is displayed without any network name, only
emergency services will be accessible (police, ambulance, fire
brigade).
- If the flashes, the phone will keep searching. No network is
available.
Getting started 17