Setting Time And Date - Sagem My-X2a Manual

251312906 My-X2a English.book Page 22 Mercredi, 9. juillet 2003 1:46 13
My phone in 5 minutes
Setting time and
date
Time and date
Date valid?
Friday
03 May 2002
Cancel OK
Network
If the network icon appears, calls are possible on your operator's network.
If the letter R and a network name are displayed, calls are possible on the network of a different operator.
If the letter R is displayed without any network name, only the emergency services are accessible (ambulance,
police, fire brigade).
If the network icon flashes, the phone is in permanent search mode. There is no network available. The signal
strength indicator received allows you to display the quality of reception. If it indicates less than three bars,
search for better reception in order to call in good conditions.
22
When you use your phone for the first time, you need to set the date and
time.
In due course, when the battery is completely discharged, or if it has been
removed, you will be prompted systematically to confirm date and time.
Setting the date:
Set the date by entering it directly in numerical form or by using the
down / up keys to decrease or increase the default values.
Use the right key (or left key
field.
Once the date is correct, press the right programmable key
accept.
Setting the time: Same procedure as for setting the date.
From now on the phone hunts for a network on which it can make calls.
If it finds one, it displays the name of the network on the screen. You are
then ready to send or receive a call.
) to access the next (or last ) data input
to