Features - Kidde KN-COPP-3 Owner's Manual

Features

Digital Display
The continuous digital display shows you the level of carbon
monoxide (if any) the unit is sensing. The unit updates this
reading every 15 seconds so you can watch levels rise or fall.
Test/Reset Button
This button has three functions. First, this is the button you
press when you test the unit weekly. Secondly, you press this
button if the unit alarms and you want to silence the alarm.
This will reset the unit and it will then again start monitoring
for CO. Finally the Test / Reset button is used to reset the peak
level memory.
Peak Level Button
By pressing this button, you can see the peak CO level
recorded by the alarm since it was last cleared or unplugged.
Sensor
The CO sensor is a highly sensitive, electrochemical sensor
that is CO-specific to help avoid false alarms.
Sounder Alarm
The sounder alarm is the loud 85 decibel (db) pulsing alarm
that will sound to alert you to a potential problem.
Keyholes
The keyholes located on the back of the alarm slide onto the
screws located in the wall.
Pull-Out Transformer/Adaptor
This unique feature enables the alarm to be used as a direct
plug unit, a wall-mounted unit or a tabletop unit.
Rechargeable Backup Battery
The rechargeable battery pack is to supply a short-term
backup during a power outage. In the event of a power
outage, the rechargeable battery pack will continue operating
the alarm for at least 20 hours.
5