Kidde KN-COPP-3 Specifications

AC Powered, Digital Display, Plug-In

Carbon Monoxide Alarm

Part Number 900-0076
Digital Display
Displays the level of carbon monoxide the unit is sensing.
The unit updates this reading every 15 seconds.
Test/Reset Button
Tests unit's electronic circuitry and horn and
resets the unit during alarm.
Peak Level Button
Displays the peak CO level recorded by the alarm since
it was last reset or unplugged.
Alerts user to replace
NEW
9V Battery Back-Up
FEATURE:
CO alarm after 7 years
Provides protection during a power outage.
Alerts user to replace CO alarm
NEW
FEATURE: after 7 years of operation
Description
The Kidde 900-0076 AC powered, plug-in carbon mon-
oxide alarm utilizes sophisticated electronic components
and unmatched sensor technology to protect you and
your family from the dangers of CO. The 900-0076
includes a 9V battery backup that provides continuous
monitoring of CO levels, even during power outages,
when AC-only units are not providing protection.
The 900-0076 will detect and store measured data of
concentrated CO levels as low as 11 and up to 999 PPM
with its peak level memory display. This alarm gives you
several mounting options, including: direct-plug, a 6'
power cord or table top.
Consumer Benefits
The Kidde 900-0076 AC powered, plug in carbon mon-
oxide alarm provides you and your family with warning
signal to protect against dangerous levels of carbon mon-
oxide in your home. This alarm is easily installed in any of
your AC wall outlets. The digital display feature allows for
easy viewing of carbon monoxide levels from 30-999PPM
(parts per million). The 900-0076 is UL listed and offers a
7-year life and a 5-year limited warranty.
Model KN-COPP-3
Features and Benefits
• Digital Display – Displays the level of carbon monoxide
the unit is sensing. The unit updates this reading every
15 seconds.
• Peak Level Button – Displays the peak CO level
recorded by the alarm since it was last reset or unplugged.
• 9V Battery Back-up – Provides protection during
power outage.
• Test Button Functions –
– Tests the unit for proper operation
– Resets the Carbon Monoxide alarm
• LED Operation –
– Blinking dot in lower right corner of display denotes
normal operation
– Digital readout displays CO concentration in parts
per million (30-900PPM)
In alarm condition you will hear 4 quick beeps,
5 seconds off, repeat.
SIGNALING
U L
LISTED