Table of Contents
Advertisement
Livre du D60_GB.book Page 39 Mercredi, 8. décembre 2004 10:01 10
S
ETTINGS
•
If you do not wish to reset the base,
press No
.
Enter the base code. Press Valid.
RESET
IN
PROGRESS
displayed on the screen.
To exit the menu, press the red key
When resetting the base, the base
code becomes 0000 again.
De-registering a handset
This function enables you to de-register a
handset from your base. This may be
necessary if you have lost a handset or if you
already have 6 handsets registered to the
same base.
On the navigator key
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET.. Press Valid.
Select SET BASE. Press Valid.
Select DELETE HANDSET using
Press Valid.
.
Select the handset you wish to unregister in
the list by pressing
or
A screen prompts you to confirm the
unregistration. Press Yes
the handset.
To exit the menu, press the red key
Renaming the base
On the navigator key
. The
until the SETTINGS screen is displayed,
message
is
press OK to confirm.
.
Select ADVANCED SET.. Press Valid.
Select SET BASE. Press Valid.
Select RENAME BASE using
Valid.
Select the base for which you want to modify
the name using
Enter the new name using the keypad. Press
Valid.
, press
or
To exit the menu, press the red key
L
INE SETTINGS
.
.
or
.
Modifying the network type
Your DECT telephone can be installed on a
. Press Valid.
.
public or private network (when using a
PABX).
This function enables you to configure your
to unregister
telephone according to the type of network.
On the navigator key
.
until the SETTINGS screen is displayed,
press OK to confirm.
39
, press
.
or
.
or
. Press Valid.
.
Before changing the settings of the
telephone line, contact your operator
to obtain the parameters for your
line.
, press
or
.
. Press
.
.
or
Advertisement
Table of Contents
