Installing Favourite Lists - Sagem DVR 6200T User Manual

7-2-3 Locking and parental control
In the USER SETTING menu, select LOCKING.
- Receiver locking: completely locks access to the receiver with an access code. If you select YES,
you will be asked to enter your access code (by default 0000) each time you switch your receiver on.
- Channel locking: enables you to lock channels. You will be asked to enter your access code each
time you want to watch a locked channel. Select YES to activate the lock and select the programme
to be locked in the Channels to lock screen.
- Channels to lock: displays the list of programmes to be locked. Select the desired channels and
press to lock them or unlock them. You will be asked to enter your access code each time you
want to watch a locked channel.
- Level: locks the programmes whose level is not authorised. For example, enter 03 for maximum
control (all programmes rated will be blocked) or 18 (all programs will be accessible).
7-2-4 Changing the receiver code (access code)
In the USER SETTING menu, select CHANGE RECEIVER CODE.
This code is used and requested to lock the installation, the receiver, the channels and the recordings. By
default, the access code is initialized to 0000.

7-3 INSTALLING FAVOURITE LISTS

To access the favourite lists creation and modification screen, press
FAVOURITE LISTS.
Selected list: by default, all channels found during the installation are on list A.
You can create two distinct types of lists: TV lists and RADIO lists.
To create a new list, select an empty list (list B to H) then press
can then make your favourites list by adding channels of your choice.
To modify or remove a list of favourite channels, select it in the list and carry out the desired modifications.
If you have programmed the recording of a programme with a level higher
than your selected level, this recording will be automatically locked and will
appear only in the full list of recordings.
. Select the desired type of list. You
- 13 -
In the main menu, select
.