Installing Favourite Lists; Receiver Installation - Sagem PVR 6200T UK User Manual

6-2-4 Locking and parental consent
In USER SETTINGS, select LOCKING.
Receiver locking: Completely locks access to the Receiver with a code. If you select YES, you will be prompted
to enter your access code (1234 by default) each time you switch your receiver on.
Channel locking: Enables locking for all the channels. If you select YES, you will be prompted to enter your
access code each time you want to look at a channel.
Channel to lock: To lock some channels only. You will be prompted to enter your access code each time you
want to look at a locked channel.
Level: to lock programmes that are rated at higher parental consent that the value entered. Select 03 for
maximal control (all programmes rated will be blocked) or 18 (all programmes will be authorized).
A record on a channel locked or a programme rated with an age higher than autorized will appear only
in the the full list of recording.

6-3 Installing favourite lists

In MAINS MENU, select FAVOURITE LISTS.
Selected list: By default, all the channels found during the installation are located in list A.
There will be two distinct types of list: TV lists and RADIO lists.
To create new lists (from B to H), simply select them, add (CREATE OR MODIFY) or delete channels.

6-4 RECEIVER INSTALLATION

To move in the screens and change the various settings, simply use the keys
your selections, to validate and
To access the Receiver installation screen, press
SETTINGS.
A code prompt is displayed: enter 1234 then (to change the code, see "Changing the Receiver code (access
code)", page 7.
6-4-1 Channel search
In RECEIVER SETTINGS, select CHANNEL SEARCH.
A bar indicates the search progress.
If channels are found, a window is displayed prompting you to validate them.
The number of channels in the list may be less than the number displayed when scanning, once the
duplications have been deleted at the end of the search process.
If no channel has been found, refer to the section Antenna signal to adjust the antenna.
to quit the screens.
. Once you are in the main menu, select RECEIVER
- 8 -
, , , to indicate