Sagem DVR 6200T User Manual page 47

A black screen (no video) appears at the end of a
programmed recording.
My USB device is not detected by the receiver
(DVR6400T series).
The receiver detects my USB device but does not
display the multimedia files which are stored there
(DVR6400T series).
The receiver displays an error message when I try
to copy or move multimedia file(s) from a USB
device to the hard disk of the receiver (DVR6400T
series).
When a recording ends on a programme which does not
☞
transmit any interpretable recording video signal (Teletext
feature, MHEG only feature, fixed image, switch from
unscrambled to scrambled transmission, broadcast with
video placeholder, etc.), the video recording stops but the
time counter continues until the end of the programmed
recording time. We recommend that you edit the recording
and erase the unwanted portion, (see "Erasing a portion of a
recording", page 32).
Check that the USB device is correctly connected to the USB
☞
port.
Disconnect and re-connect the USB device back to the
☞
receiver.
Check that the USB device is compatible (See
☞
"Specifications", page 45).
Check that the multimedia files have a compatible file format
☞
(see "Specifications", page 45).
Check that the total size of the multimedia files stored on the
☞
hard disk of the receiver, including the files being copied,
does not exceed 1/16 of the total hard disk capacity. The
hard disk space allocated to multimedia files is limited to
15GB for a 250 GB hard disk, 10 GB for a 160 GB hard disk,
etc.
- 44 -