Advertisement
SPECIFICATIONS
Model name
PLC-1710-7
Type
With automatic
thread trimmer
Sewing speed
Needle
Thread
Max. stitch length
Stitch adjusting method
Thread take-up
Automatic reverse
Pneumatic type
feed function
Needle bar stroke
Hook
Lift of the presser foot
Alternating vertical
movement
Alternating vertical
movement adjusting method
DL device
Provided as standard
Safety mechanism
Bobbin thread winder
Bottom-feedmicro-
adjustment mechanism
Lubrication
Distance from needle
to machine arm
Post height
Bed size
Knee-lifter
Auto-lifter
Provided as standard
Weight of the
machine head
Air consumption
0.3dm3/min ANR
"sti/min" stands for "Stitches per Minute."
INDUSTRIAL SEWING MACHINE DIV.
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
PLC-1710
1-needle
−
134×35 Nm110 160
9mm (forward / backward)
By lever
Vertical-axis 1.6-fold capacity hook (latch type)
1 6.5mm
2.5 6.5mm
Dial
Slot slide
−
Lubrication: Centralized tank method * Lubrication with an oiler for the hook section
−
Provided as standard
Option
55kg
55kg
−
2-11-1
, TSURUMAKI, TAMA-SHI,
206-8551
TOKYO
, JAPAN
PHONE : ( 81 ) 42-357-2254
FAX : (
81
) 42-357-2274
http://www.juki.com
PLC-1760-7
2-needle
With automatic
thread trimmer
2,500sti/min
Standard Nm140
TEX 50 135
By dial
Slide type
Pneumatic type
36mm
By hand: 9mm, Auto: 16mm
1 6.5mm
Dial
Provided as standard
Provided as standard
Built in the machine arm
Provided as standard
255mm
161.7mm
517mm×178mm
−
Provided as standard
56kg
0.3dm3/min ANR
PLC-1760
PLC-1760L
Thick-thread
−
long-pitch type
1,800rpm P=0 10mm
1,600rpm P=10 12mm
134×35 Nm140 200
Standard Nm200
TEX 105 270
12mm (forward / backward)
By lever
By lever
38mm
Vertical-axis 1.6-fold
capacity hook (cap type)
2.5 6.5mm
1 6.5mm
Slot slide
−
Option
Provided as standard
Provided as standard
Option
Option
56kg
−
0.3dm3/min ANR
MARCH, 2011 Printed in Japan(C)
Dial
58g
Advertisement
