Table of Contents
Advertisement
AXE2DL User Manual with DAHDI
Chapter 4 Software Configuration
1. Please run the "dahdi_genconf" command to configure the "/etc/dahdi/system.conf" file and
generate "/etc/asterisk/dahdi-channels.conf" file.
[root@localhost ~]# dahdi_genconf
It will not show any output when the command run successfully.
After do that successfully, it will get the following configuration in the "system.conf" file
with E1 mode.
[root@localhost ~]# cat /etc/dahdi/system.conf
# Autogenerated by /usr/sbin/dahdi_genconf
# This file is parsed by the Dahdi Configurator, dahdi_cfg
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3,crc4
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
www.atcom.cn
do not hand edit
11
Advertisement
Table of Contents
Need help?
Do you have a question about the AXE2DL + EC64L and is the answer not in the manual?
Questions and answers