Diamond View DV172 Manual page 11

3. Alternatively to use the DVI signal input, connect the DVI-D cable from
the digital DVI-D connector (24-pin socket) of the computer's graphics
card (optional) to the DVI-D connector (24-pin socket) of your monitor.
4. Connect the stereo audio cable from the monitor's audio jack to the
audio output of your computer's sound card.
5. Connect the power cord from the monitor's power jack to an AC power
socket. Please make sure that you have easy access to the power
socket so you can disconnect the unit from the power socket should
you need to.
Power Cord
Signal cable
Audio cable
7