Table of Contents
Advertisement
2-2. UNPACKING
(Continued)
2-3.
ELECTRICAL
2-2
Take care when moving the fryer to prevent personal
injury
or damage to the refrigeration system.
CMC-107s weigh over 700 lbs. (318 kg).
4.
Peel off any protective covering from exterior of the cabinet.
5.
Install the grids into unit.
6.
Unpack sliding thermal doors and side glass. Install on rear
and side of unit.
7.
Your cold top is now ready for operation.
The Cold Top is available as a 120 VAC, 60 Hz. or 230VAC,
50 Hz., single phase unit, both for domestic and international use.
The data plate, located beside the power cord, specifies the correct
electrical supply. The Cold Tops are shipped with cord and plug,
and requires a grounded receptacle with a separate electrical line
protected by a fuse or circuit breaker of the proper rating. Position
the unit so the power cord receptacle is accessible.
To avoid electrical shock, this appliance must be
equipped with an external circuit breaker which will
disconnect all ungrounded (unearthed) conductors.
Refer to the table below for electrical ratings:
Model No.
Volts
CMC-103
120
CMC-103
230
CMC-104
120
CMC-104
230
CMC-105
120
CMC-105
230
CMC-106
120
CMC-106
230
CMC-107
120
CMC-107
230
Model CMC/CMR-103,104,105,106,107
Amps
Phase
Max. Fuse Size
7.7
1
4.5
1
7.7
1
4.5
1
8.6
1
6.0
1
8.6
1
6.0
1
9.5
1
7.7
1
The
15
15
15
15
15
15
15
15
15
15
303
Advertisement
Table of Contents
