When Your Monitor Must Be Adjusted; How To Adjust Your Monitor Using The Diskette - Diamond View DV150 User Manual

F
If "Non Preset Mode" appears on the OSD, it means that the graphics
card has set an unacceptable timing.
supported timings on the next page and set the graphics card to use a
preset timing.

When Your Monitor Must Be Adjusted

If the resolution or refresh rate is changed
l
If the graphic card is changed
l
If the PC is changed
l
After using the "Recall" function
l

How to Adjust Your Monitor using the Diskette

Using the test pattern on the diskette, you can easily optimize your screen
performance.
Steps:
1. Insert the diskette and display the test pattern by running A:\auto.exe
2. Press the Auto key for automatic adjustment.
To manually fine tune the settings:
3. Press Enter to open the OSD menu.
4. Using the pattern, adjust the OSD controls to reach your desired
brightness, contrast, etc.
5. Select Geometry
6. Select Pixel Clock
bars.
7. Select Phase
bars.
8. Select Horizontal Position
screen position.
9. Press Exit button to save the changes.
10. Press the left mouse button to exit the program and then click "Exit".
icon.
function to adjust the value to minimize vertical
function to adjust the value to minimize horizontal
and Vertical Position
12
Please refer to the table of
to adjust