To Adjust Program Schedules; Program Schedule Override (Temporary) - Honeywell FocusPRO 6000 Series User Manual

To adjust program schedules

1. Press SET CLOCK/DAY/SCHEDULE,
then SET SCHEDULE.
2. Press or
s t
Wake time (Mon–Fri), then press
NEXT.
3. Press or
s t
for this time period, then press NEXT.
4. Set time and temperature for the
next time period (Leave). Repeat
steps 2 and 3 for each weekday time
period.
5. Press NEXT to set weekend time
periods (Sat-Sun), then press DONE
to save & exit.
NOTE: Make sure the thermostat is
set to the system you want to program
(Heat or Cool).
NOTE: You can press CANCEL PERIOD to
eliminate unwanted time periods (except
Wake).

Program schedule override (temporary)

Press or to immediately adjust
s t
the temperature. This will temporarily
override the temperature setting for
the current time period.
The new temperature will be
maintained only until the next
programmed time period begins.
For example, if you want to turn up
the heat early in the morning, it will
automatically be lowered later, when
you leave for the day.
To cancel the temporary setting at
any time, press RUN SCHEDULE.
Make sure the thermostat is
NOTE:
set to the system you want to control
(heat, cool or auto).
to set your weekday
to set the temperature
Set Clock/Day/
Schedule
Done
Set Schedule
Leave Mon Tue Wed Thu Fri
Done
Inside
69
6 : 30
Fan
Run Schedule
Auto
3
Fan System
Auto Cool
Set Day Set Schedule
Heat
Setting
62
8 : 00
AM
Next
CancelPeriod
MCR29462
Heat
Temporary
Setting
75
AM
System
Heat
MCR29463