Location; Setup - Hoshizaki KM-901MAH50 Instruction Manual

Modular crescent cuber
Table of Contents

Advertisement

C. Location
1. This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within 45°F to 100°F (7°C to 38°C); Normal operating
water temperature should be within 45°F to 90°F (7°C to 32°C). Operation
of the icemaker, for extended periods, outside of these normal temperature
ranges may affect icemaker performance.
2. This icemaker will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the icemaker if the air temperature is going to
go below 32°F (0°C). See "III.C. Preparing the Icemaker for Long Storage."
For best operating results:
• The icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• The location should provide a firm and level foundation for the equipment.
• Allow 6" (15 cm) clearance at rear, sides, and top for proper air circulation and ease of
maintenance and/or service should they be required.
D. Setup
1) Unpack the storage bin, and attach the 4 adjustable legs provided (bin accessory) to
the bottom of the storage bin.
2) Position the storage bin in the selected permanent location.
3) Place the icemaker on top of the storage bin.
4) Secure the icemaker to the storage bin
using the 2 mounting brackets and the
bolts provided. See Fig. 2.
5) Level the icemaker and storage bin in both
the left-to-right and front-to-rear directions.
Adjust the storage bin legs to make the
icemaker level.
6) Replace the panels in their correct
positions.
CAUTION
Fig. 2
10
Icemaker
Bin
Mounting
Brackets
Bolts

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-901mrh50

Table of Contents